Microtubes B3K V2, Darkglass køb i Hasselager

Denne fantastiske bas overdrive sælges. Den er helt ny. Købt 02.03.2024, kvittering haves. https://www.darkglass.com/creation/microtubes-b3k/ Specs Blend Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio. Tone Controls the high frequency content of the sound. A variable low pass filter from 3kHz (ccw) to 8kHz (cw). Level Sets the volume of the overdriven signal. Drive Sets the amount of saturation in the overdriven signal. Grunt When engaged provides a massive low end boost to really thicken your sound. Mid Boost Gives a subtle 6dB boost from 300 Hz to 1kHz to help you cut through a bit more. Output Connect from the ¼” Output jack to the input of your amplifier or another effects pedal. Input Connect your instrument or output from your pedal board to the ¼” mono jack. 9V DC Only use a regulated 9V DC adapter with a center-negative plug. Dimensions Width: 75 mm / 3? Length: 111 mm/ 4¼? Height: 43 mm / 1¾? Weight: 250 g / 0.55 lb Warning The Microtubes B3K has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug.