Guitarcombo, RedPlate Blackverb , 50/18 W køb i Ballerup

1 / 8
Guitarcombo, RedPlate Blackverb , 50/18 W
2 / 8
Guitarcombo, RedPlate Blackverb , 50/18 W
3 / 8
Guitarcombo, RedPlate Blackverb , 50/18 W
4 / 8
Guitarcombo, RedPlate Blackverb , 50/18 W
5 / 8
Guitarcombo, RedPlate Blackverb , 50/18 W
6 / 8
Guitarcombo, RedPlate Blackverb , 50/18 W
7 / 8
Guitarcombo, RedPlate Blackverb , 50/18 W
8 / 8
Guitarcombo, RedPlate Blackverb , 50/18 W


loading

  • ➡️ Product: Guitarcombo
  • ➡️ Make: RedPlate
  • ➡️ Model: Blackverb
  • ➡️ Watt: 50/18
  • ➡️ SelleR_TYPE: PRIVATE
Her en enestående mulighed for at erhverve sig en boutique amp i særklasse. I utrolig flot stand og spiller fantastisk. Massere af power og clean headroom samt mulighed for tilføje gainstage for low- to high (-metal) gain sounds (50W/40W/18W). Alle rør er skiftet og nye samt biased, så den er klar til en ny era. Sælges med flightcase, footswitch, kabler og et par nye 6V6 tubes. Features: -6-way Mid Q (mode) Switch: Dial in your mids for everything from a scooped “country” tone to a full on fat “fusion” tone (Vibrolux, Blackface, Super Reverb/Twin). -Pull Middle knob: Shifts the mids to get a warmer sound akin to a "deep" switch. -SMOOTH Switch, Employs local negative feedback in the clean preamp for a hint of compression. -Humbucker / Single coil Switch. -3-Way Bright Switch. -Tone Stack Bypass: remove the whole tone stack from the circuit to get a “guitar-straight-to-master volume” path. -Drive Shift: Shifts the overdrive tonality to a more aggressive British character. -Presence Bypass: Dial in just the right amount of brightness or remove the presence control from circuit. -Tube tank-type reverb: Can be turned off to create more headroom by removing it from the circuit. -Tube Buffered Serial Effects Loop -50 WATT / 40 WATT Switch: This switch changes the bias architecture of the output tubes from fixed bias (50 WATT) to cathode biased (40 WATT). The 40 WATT position allows the use of 6V6 tubes for lower power output (~18 Watts with 6V6). -HI/LO POWER Switch: Changes the voltage on the power amp input stage (Phase Inverter tube) so the amplifier breaks up sooner. -Bias adjustment and bias test point: Allows external access for bias adjustment. -LINE OUT: A line level signal jack derived from the speaker output which contains the whole tone of the amplifier. -3-Button Foot switch: The footswitch lets you choose Mid mode (takes you right to the tweed mode on the 6-way Mid Q), Drive and Boost using a standard midi cable. -1x12 WGS Retro 30, 8 ohm,75w
🏷 kr.16,999
📍2750 Ballerup
⏱ Dato for offentliggørelse: 11.03.2024
Her en enestående mulighed for at erhverve sig en boutique amp i særklasse. I utrolig flot stand og spiller fantastisk. Massere af power og clean headroom samt mulighed for tilføje gainstage for low- to high (-metal) gain sounds (50W/40W/18W). Alle rør er skiftet og nye samt biased, så den er klar til en ny era. Sælges med flightcase, footswitch, kabler og et par nye 6V6 tubes. Features: -6-way Mid Q (mode) Switch: Dial in your mids for everything from a scooped “country” tone to a full on fat “fusion” tone (Vibrolux, Blackface, Super Reverb/Twin). -Pull Middle knob: Shifts the mids to get a warmer sound akin to a "deep" switch. -SMOOTH Switch, Employs local negative feedback in the clean preamp for a hint of compression. -Humbucker / Single coil Switch. -3-Way Bright Switch. -Tone Stack Bypass: remove the whole tone stack from the circuit to get a “guitar-straight-to-master volume” path. -Drive Shift: Shifts the overdrive tonality to a more aggressive British character. -Presence Bypass: Dial in just the right amount of brightness or remove the presence control from circuit. -Tube tank-type reverb: Can be turned off to create more headroom by removing it from the circuit. -Tube Buffered Serial Effects Loop -50 WATT / 40 WATT Switch: This switch changes the bias architecture of the output tubes from fixed bias (50 WATT) to cathode biased (40 WATT). The 40 WATT position allows the use of 6V6 tubes for lower power output (~18 Watts with 6V6). -HI/LO POWER Switch: Changes the voltage on the power amp input stage (Phase Inverter tube) so the amplifier breaks up sooner. -Bias adjustment and bias test point: Allows external access for bias adjustment. -LINE OUT: A line level signal jack derived from the speaker output which contains the whole tone of the amplifier. -3-Button Foot switch: The footswitch lets you choose Mid mode (takes you right to the tweed mode on the 6-way Mid Q), Drive and Boost using a standard midi cable. -1x12 WGS Retro 30, 8 ohm,75w

Tobias U.

Lignende annoncer

Arvestykke så viden om den er begrænset. Du er velkommen til at prøve før køb. "The GL-100 Contains a line driver simulating a large s...
kr. 500
Ballerup
Super fed rock/heavy amp i rigtig god stand og virker perfekt - lyder pisse godt. Forstærkeren har to kanaler (JCM 900 og EVH5150) s...
kr. 6900
Ballerup
Effekt fra dødsbo, derfor er viden begrænset Der er flere reguleringer til at justere lyden med. Du er velkommen til at afprøve den. De...
kr. 500
Ballerup
Gedigen forstærker med clean og lead kanal. Både clean og overdrive/distortion lyder fortrinligt. Indbygget reverb og 3-vejs equalizer....
kr. 1000
Ballerup
Arvestykke så viden om den er begrænset. Du er velkommen til at prøve før køb. "The GL-100 Contains a line driver simulating a large s...
kr. 500
Ballerup
Danannoncer.com - gratis private annoncer i Danmark | Kontakter: [email protected] |